The fuel metering valve test bench was independently developed by Chenlin Company and is an excellent product preferred by the automotive teaching and research departments of high-end auto repair shops and automobile manufacturers. 1. Scope of use
Test and analyze the product quality condition of the fuel metering valve
Test the drip angle and atomization state of the fuel metering valve
Test the uniformity of the fuel injection amount of the fuel metering valve
Physical cleaning and chemical cleaning of blocked and faulty fuel metering valves
Three Precautions
Please read the relevant precautions and operating instructions carefully before using this machine. Please keep it properly after reading it. This machine must be used by specially trained personnel to avoid equipment failure due to incorrect operation.
Operations must be carried out in compliance with the industry safety rules of the auto repair shop. Pay special attention to the impact or damage caused by the surrounding environmental factors such as acid, alkali, poison, oxygen, high pressure, heavy objects, etc.
No open flames or smoking are allowed around the working environment. Do not use or place gasoline or other flammable and explosive materials near the instrument. The indoor sunlight cannot be exposed directly to the machine and a dry powder fire extinguisher is provided.
There are many toxic compounds (carbon monoxide, nitrides and hydrocarbons in the exhaust gas from the engine. Avoid inhalation. Park the vehicle in a well-ventilated place during operation.
Avoid contact with the water tank when the temperature is high when the engine is running. and exhaust pipes and other high-temperature components.
The power supply must comply with safety standards and a leakage protector must be installed. The chassis must be grounded to work. The machine must be shut down intermittently to ensure the service life of the machine if it works continuously for a long time.
It is strictly forbidden to start the ultrasonic system without adding lotion in the ultrasonic tank. Otherwise, the three tubes on the oscillation plate will burn out due to no load.
It is forbidden to use flammable products such as rubber water as test agents.
Test Fluids and cleaning fluids are environmentally friendly and safe products, pollution-free and corrosion-free. The patented formula is composed of strengthened liquid agents, high-efficiency dispersants and other ingredients. It has a strong function of removing carbon deposits and oil deposits without damaging parts. However, the two cannot be mixed. For use due to Users and manufacturers will not bear any responsibility for adverse consequences caused by using other brands of testing fluids and cleaning fluids.
If you need to consult the product, performance, operation and maintenance, please contact the manufacturer directly.
If the machine is faulty, please contact the manufacturer directly. Do not unpack and repair without authorization.
Standard configuration is subject to the content and quantity of the packing list. Product design and performance changes are not subject to individual notification.
Four technical performance
Ability to realistically simulate dripping of the fuel metering valve The atomization angle switch cycle uniformity is automatically or selectively detected. The detection range is speed/injection pulse width. The speed and pulse width are inversely proportional to the functional relationship and dynamically observe the working condition of the injector.
Special The detection method can be added and subtracted at will to simulate the engine speed up and down conditions. The load signal feedback can be interrupted or restored at will during the detection. The latest high-precision countdown or timing test method is adopted.
The washing system can Single and multiple fuel metering valves are inspected and cleaned and ultrasonic cleaned.
Sonic cleaning method. Environmentally friendly high-frequency ultrasonic cleaning is used.
The oil system is manually adjusted to stabilize the pressure.
Off-cycle measurement The shortest switching cycle of the fuel metering valve can be measured to identify the quality and difference of the fuel metering valve.
The Ying structural design adopts the latest technology of lightweight materials, high-precision equal volume cylinders and background light design.
Technical parameters
Detect the number of cylinders
Fuel tank capacity and measuring cylinder capacity
System flow/system oil pressure
Power supply specification_﹪
Relative humidity of working environment
Speed range step size
Ultrasonic cleaning device split standard package
Natural gas nozzle test bench